Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands (T-threshold phspc)
threshold dcca-bad-answers ▀
Command Line Interface Reference, StarOS Release 17 ▄
5593
threshold dcca-bad-answers
Configures alarm or alert thresholds for invalid or bad responses to the system from Diameter servers.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold dcca-bad-answers high_thresh [ clear low_thresh ]
default threshold dcca-bad-answers
default
Disables the threshold for configured alarm and sets the
high_thresh
and
low_thresh
values to 0.
high_thresh
Default: 0
Specifies the high threshold number of invalid messages or responses that must be met or exceeded within the
polling interval to generate an alert or alarm.
Specifies the high threshold number of invalid messages or responses that must be met or exceeded within the
polling interval to generate an alert or alarm.
high_thresh
is an integer from 0 through 1000000.
clear
low_thresh
Default: 0
Specifies the low threshold number of invalid messages/responses that maintains a previously generated
alarm condition. If the number of failures falls beneath the low threshold within the polling interval, a clear
alarm will be generated.
Specifies the low threshold number of invalid messages/responses that maintains a previously generated
alarm condition. If the number of failures falls beneath the low threshold within the polling interval, a clear
alarm will be generated.
low_thresh
is an integer from 0 through 1000000.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
In the event that the system receives invalid message or response from Diameter server dcca-bad-answers is
generated.
DCCA bad answer messages size threshold generates alerts or alarms based on the number of invalid
response or messages received during the specified polling interval.
Alerts or alarms are triggered for DCCA bad answers based on the following rules:
generated.
DCCA bad answer messages size threshold generates alerts or alarms based on the number of invalid
response or messages received during the specified polling interval.
Alerts or alarms are triggered for DCCA bad answers based on the following rules: