Cisco Cisco Aironet 350 Wireless LAN Client Adapter
16
Release Notes for Cisco Aironet 350 and CB20A Client Adapter Install Wizard 1.8 for Windows
OL-15650-01
Installing or Upgrading Client Adapter Software
Step 22
If you want to install a second client adapter, allow your computer to reboot completely; then insert the
second adapter into your computer. Depending on your computer’s operating system, one of the
following scenarios occurs:
second adapter into your computer. Depending on your computer’s operating system, one of the
following scenarios occurs:
•
The Found New Hardware Wizard screen appears. Depending on your computer’s operating system,
you may have to click Next. The driver and other software components are installed, and another
ACM icon appears in the Windows system tray. Click Yes or OK when a message appears about
rebooting your computer.
you may have to click Next. The driver and other software components are installed, and another
ACM icon appears in the Windows system tray. Click Yes or OK when a message appears about
rebooting your computer.
Note
To ensure that your client adapter software is installed properly, Cisco recommends that you
reboot your computer now.
reboot your computer now.
•
The driver and other software components are installed, and another ACM icon appears in the
Windows system tray. Click Yes or OK when a message appears about rebooting your computer.
Windows system tray. Click Yes or OK when a message appears about rebooting your computer.
Note
To ensure that your client adapter software is installed properly, Cisco recommends that you
reboot your computer now.
reboot your computer now.
Step 23
If your network setup does not include a DHCP server and you plan to use TCP/IP, follow these steps
for your operating system. If you have more than one client adapter installed, repeat this step for each
adapter.
for your operating system. If you have more than one client adapter installed, repeat this step for each
adapter.
•
Windows 2000—Double-click My Computer, Control Panel, and Network and Dial-up
Connections. Right-click Local Area Connection x (where x represents the number of the
connection). Click Properties, Internet Protocol (TCP/IP), and Properties. Click Use the
following IP address and enter the IP address, subnet mask, and default gateway address of your
computer (which can be obtained from your system administrator). Click OK. In the Local Area
Connection Properties window, click OK.
Connections. Right-click Local Area Connection x (where x represents the number of the
connection). Click Properties, Internet Protocol (TCP/IP), and Properties. Click Use the
following IP address and enter the IP address, subnet mask, and default gateway address of your
computer (which can be obtained from your system administrator). Click OK. In the Local Area
Connection Properties window, click OK.
•
Windows XP—Right-click Wireless Network Connection and click Properties. Click Internet
Protocol (TCP/IP) and click Properties. Choose Use the following IP address and enter the IP
address, subnet mask, and default gateway address of your computer (which can be obtained from
your system administrator). Click OK
Protocol (TCP/IP) and click Properties. Choose Use the following IP address and enter the IP
address, subnet mask, and default gateway address of your computer (which can be obtained from
your system administrator). Click OK
Step 24
If you are prompted to restart your computer, click Yes. The installation is complete.