Cisco Cisco Aironet 350 Wireless LAN Client Adapter

If you are not using a PPC 2002 device, the Cisco Aironet Wireless LAN Adapter Setup screen appears. 
Click Next to start the Windows CE Application Manager (CeAppMgr), which is installed with 
ActiveSync. CeAppMgr interrogates the Windows CE device to determine its platform type.

If a Windows CE device is not connected to the laptop or PC (as instructed in 

), click Exit 

to quit the setup program and connect a Windows CE device or click Next to continue the 
installation. If you choose Exit, click OK to shut down CeAppMgr and start again beginning 
with 

. If you choose Next, a message appears indicating that the software will be 

downloaded the next time a mobile device is connected. Click OK. The next time a Windows 
CE device is connected to the laptop or PC via ActiveSync, CeAppMgr starts automatically, and 
you are prompted to install the software.

When the Installing Applications dialog box appears asking if you want to install the client adapter using 
the default application installation directory, click Yes. The default directory is \Windows\Start 
Menu\Programs\Cisco on PPC devices and \Windows\Programs\Cisco on HPC and Windows CE .NET 
devices.

A message and a progress bar appear indicating that the client adapter (and 802.1X backport if you are 
using a PPC 2002 device) is being installed.

The driver and help files are copied to the \Windows directory, and the client utilities are installed in the 
\Windows\Start Menu\Programs\Cisco directory on PPC devices or the \Windows\Programs\Cisco 
directory on HPC and Windows CE .NET devices. Shortcuts to ACU and WLM are automatically added 
to the desktop on HPC and Windows CE .NET devices.

When the installation process is complete on the laptop or PC, a message appears asking you to view the 
screen of the Windows CE device to see if any additional steps are required to complete the installation. 
Click OK to terminate the installation process on the laptop or PC.

Complete any required steps on the Windows CE device.

Disconnect the Windows CE device.

If you are using a PPC 2002 device and you installed the 802.1X backport, reset your Windows CE 
device now. (You should have been notified earlier that a reset would be required after installation.)

Insert the client adapter into the PC card slot of the Windows CE device. The Windows CE device should 
configure the client adapter, and the green LED on the adapter should blink. If this does not happen, 
remove the client adapter, reset the Windows CE device, and reinsert the client adapter.

The Cisco Wireless LAN Adapter Settings dialog box appears. If the dialog box does not appear, perform 
one of the following:

Tap Start > Settings > the Connections tab > Connections > Advanced > Network Card > Cisco 
Wireless LAN Adapter on PPC 2003 devices.

Tap Start > Settings > the Connections tab > Network Adapters > Cisco Wireless LAN Adapter 
> Properties on PPC 2002 devices.

Tap Start > Settings > Control Panel > Network > the Adapters tab > Cisco Wireless LAN 
Adapter > Properties on HPC devices.

Tap Start > Settings > Network and Dial-up Connections > the Cisco Wireless LAN Client 
Adapter icon on Windows CE .NET devices.