Cisco Cisco Aironet 350 Wireless LAN Client Adapter

This section describes how to install or upgrade to client utility and driver release 2.30 for
Windows CE.

Cisco recommends that you uninstall the existing driver and client utilities for your client adapter before 
upgrading to more recent versions. Follow the steps below to uninstall your client adapter’s current 
driver and client utilities.

Eject the client adapter and remove it from the Windows CE device.

Select Start > Settings > System tab > Remove Programs (on PPC devices) or Start > Settings > 
Control Panel > Remove Programs (on HPC and Windows CE .NET devices).

Select Cisco Wireless LAN Adapter.

Tap the Remove button.

When asked to verify your decision to remove the adapter, tap Yes.

Tap OK. The driver, client utilities, registry entries, and Cisco directory are removed.

Go to the 

 section below for instructions on loading the new 

driver and client utilities.

Follow the steps below to install client utility and driver version 2.30 for your client adapter.

Connect your Windows CE device to a laptop or PC running Microsoft ActiveSync. This is typically 
done using a serial or USB cable.

A message appears on the Windows CE device indicating that it is connecting to the host. After the 
Windows CE device is connected, the New Partnership window appears on the laptop or PC. This 
window asks if you want to set up a partnership.

Cisco recommends that you install the latest version of ActiveSync.

Perform one of the following:

If you want to establish a partnership that enables you to synchronize files between the laptop or PC 
and the Windows CE device, select Yes, click Next, and follow the instructions on the screen to 
specify the files to be synchronized and to finish setting up the partnership.

If you do not want to synchronize files and want to connect as a “guest,” select No and click Next. 
The screen indicates that you are connected as a guest.