Cisco Cisco Aironet 350 Wireless LAN Client Adapter

This document describes system requirements, important notes, new and changed information, 
installation and upgrade procedures, and caveats for the following releases of Cisco Aironet client 
adapter software:

2.72 of the Cisco Aironet client utilities for Windows CE

2.72 of the Cisco Aironet client adapter driver for Windows CE

The client utilities, driver, and help files are released together in a single file entitled 
WinCE-PCMCIA-LMC-v272.exe.

You need the following in order to install client utility and driver release 2.72 for Windows CE:

One of the following Windows CE devices equipped with a Type II or Type III PC card slot:

HPC 2000 device running Windows CE 3.0 with an ARM, StrongARM, MIPS, SH4, or X86 
platform

PPC 2000 device running Windows CE 3.0 with an ARM, StrongARM, MIPS, or SH3 platform

PPC 2002 device running Windows CE 3.0 with a StrongARM platform

PPC 2003 device running Windows CE .NET 4.2 with a StrongARM platform

Windows CE .NET device running Windows CE .NET 4.0 or 4.1 with an ARMv4I, ARMv4T, 
or MIPSII platform

Windows CE .NET device running Windows CE .NET 4.2 with a StrongARM (ARMv4), 
ARMv4I, or X86 platform

Cisco Aironet 350 Series Wireless LAN Client Adapter (PC card or LM card)

Client adapter utility and driver release 2.72 is not supported for use with Cisco Aironet 340 
series client adapters.

Client adapter firmware version 5.60.21 (recommended)

Laptop or PC running a Windows operating system and Microsoft ActiveSync

ActiveSync connection (which can be serial, USB, etc.) to the Windows CE device

A PPC 2002, PPC 2003, or Windows CE .NET 4.2 device, if your wireless network uses EAP-FAST, 
EAP-TLS, or PEAP authentication

Certificate Authority (CA) and user certificates for EAP-TLS authentication or CA certificate for 
PEAP authentication

If your wireless network uses PEAP authentication with a One-Time Password (OTP) user database:

The hardware token from an OTP vendor

Your hardware token password