Cisco Cisco Aironet 350 Wireless LAN Client Adapter
3
Release Notes for Cisco Aironet Client Utilities 2.72 and Driver 2.72 for Windows CE
OL-10423-01
Important Notes
•
The following information from your system administrator:
–
The logical name for your Windows CE device (also referred to as client name)
–
The case-sensitive service set identifier (SSID) for your RF network
–
The primary and secondary Domain Name System (DNS) and Windows Internet Name Service
(WINS) to be assigned to your Windows CE device
(WINS) to be assigned to your Windows CE device
–
If your network setup does not include a DHCP server, the IP address, subnet mask, and default
gateway address to be assigned to your device
gateway address to be assigned to your device
–
The wired equivalent privacy (WEP) keys of the access points with which your client adapter
will communicate, if your wireless network uses static WEP for security
will communicate, if your wireless network uses static WEP for security
–
Your username and password for LEAP, EAP-FAST, or PEAP authentication, if your wireless
network uses one of these authentication types
network uses one of these authentication types
–
Your username for EAP-TLS authentication, if your wireless network uses EAP-TLS
authentication
authentication
–
Protected access credentials (PAC) file if your wireless network uses EAP-FAST authentication
with manual PAC provisioning
with manual PAC provisioning
•
Access points to which your client adapter may attempt to authenticate must use the following
firmware versions or later: 12.00T (340, 350, and 1200 series access points) or Cisco IOS Release
12.2(4)JA (1100 series access points).
firmware versions or later: 12.00T (340, 350, and 1200 series access points) or Cisco IOS Release
12.2(4)JA (1100 series access points).
•
All necessary infrastructure devices such as access points, servers, gateways, and user databases
must be properly configured for the authentication type you plan to enable on the client.
must be properly configured for the authentication type you plan to enable on the client.
Important Notes
Support for Earlier CE Devices
Although this release can be installed on earlier CE devices and might work properly for most
applications, no testing was performed for these earlier devices. Cisco cannot guarantee complete
functionality. Cisco will not support or address any issues that arise from installing this release on those
devices.
applications, no testing was performed for these earlier devices. Cisco cannot guarantee complete
functionality. Cisco will not support or address any issues that arise from installing this release on those
devices.
Recommended Firmware Version
Client adapter firmware version 5.60.21 is recommended for use with client utility and driver release
2.72 for Windows CE. If your client adapter is using a previous firmware version, follow the instructions
in the Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for
Windows CE (part number OL-1375-05) to upgrade the firmware after installing client utility and driver
release 2.72.
2.72 for Windows CE. If your client adapter is using a previous firmware version, follow the instructions
in the Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for
Windows CE (part number OL-1375-05) to upgrade the firmware after installing client utility and driver
release 2.72.
Delay in Windows CE DHCP Handler
A delay in the Windows CE DHCP handler prevents a device from recovering in less that 15 seconds.