Cisco Cisco Aironet 350 Wireless LAN Client Adapter

Client utility release 2.22 and driver release 2.30 can be used only with Cisco Aironet 350 Series 
Wireless LAN Client Adapters (PC cards and LM cards) and a Windows CE Handheld PC (HPC) device 
with an ARM, StrongARM, MIPS, SH3, SH4, or x86 processor that is running Windows CE 2.11.

This release should operate with Cisco Aironet 340 and 4800 series cards; however, official testing was 
not conducted with these cards.

This section describes how to upgrade to client utility release 2.22 and driver release 2.30 on a 
Windows CE 2.11 device.

The client utilities and help files are installed with the driver.

Cisco recommends that you uninstall the existing driver and client utilities for your client adapter before 
upgrading to a more recent release. This section provides instructions for uninstalling your client 
adapter’s current driver and client utilities. The instructions vary depending on your client adapter’s 
current driver release.

Terminate any Cisco Aironet applications running on the Windows CE device and eject the client 
adapter.

Tap Start > Programs > Cisco > Cisco Aironet Uninstall. The Cisco Aironet Uninstall screen appears.

Check the Uninstall Cisco Aironet Wireless LAN Adapter check box.

Tap OK. The utility informs you that the adapter has been uninstalled. The registry entries (but no files) 
are removed.

Delete the aironet.dll driver file and the following help files from the \Windows directory of the 
Windows CE device: AuthType.htm, CEM.htm, Cisco Setup.htm, ClieName.htm, DataRate.htm, 
DHCP.htm, InfrStru.htm, LEAP.htm, LeapLogin.htm, PSMode.htm, SSID.htm, TxPowe.htm, 
WEP.htm, and WorldMode.htm.

Delete the following client utility files, which are probably in the \Windows\Programs\Cisco directory 
on the Windows CE device: Aironet Client Utility.exe, Cisco Aironet Uninstall.exe, Cisco Link 
Status.exe, Client Encryption Manager.exe, Client Statistics Utility.exe, Load New Firmware.exe, 
and Site Survey Tool.exe.