Cisco Cisco Aironet 350 Wireless LAN Client Adapter
3
Release Notes for Cisco Aironet Client Utilities 2.22 and Driver 2.30 for Windows CE 2.11
OL-5202-01
Upgrading to a New Client Utility and Driver Release
Step 7
Delete the Cisco directory from \Windows\Programs.
Step 8
Go to the
section below for instructions on loading the new
driver and client utilities.
Uninstalling Driver Release 1.50 or Later
Step 1
Eject the client adapter and remove it from the Windows CE device.
Step 2
Tap Start > Settings > Control Panel > Remove Programs.
Step 3
Tap Cisco Wireless LAN Adapter.
Step 4
Tap Remove.
Step 5
When asked to verify your decision to remove the adapter, tap Yes.
Step 6
Tap OK. The driver, client utilities, registry entries, and Cisco directory are removed.
Step 7
Go to the
section below for instructions on loading the new
driver and client utilities.
Loading a New Driver and Client Utilities
Follow these steps to install driver release 2.30 and client utility release 2.22 for your client adapter.
Step 1
Make sure that the client adapter is removed from the Windows CE device.
Step 2
Use a serial or USB cable to connect your Windows CE device to a laptop or PC running Microsoft
ActiveSync. A message appears on the Windows CE device indicating that it is connecting to the host.
After the Windows CE device is connected, the New Partnership window appears on the laptop or PC.
This window asks if you want to set up a partnership.
ActiveSync. A message appears on the Windows CE device indicating that it is connecting to the host.
After the Windows CE device is connected, the New Partnership window appears on the laptop or PC.
This window asks if you want to set up a partnership.
Note
Cisco recommends that you install the latest release of ActiveSync.
Step 3
Perform one of the following:
•
If you want to establish a partnership that allows you to synchronize files between the laptop or PC
and the Windows CE device, choose Yes, click Next, and follow the instructions on the screen to
specify the files to be synchronized and to finish setting up the partnership.
and the Windows CE device, choose Yes, click Next, and follow the instructions on the screen to
specify the files to be synchronized and to finish setting up the partnership.
•
If you do not want to synchronize files and want to connect as a “guest,” choose No and click Next.
The screen indicates that you are connected as a guest.
The screen indicates that you are connected as a guest.
Step 4
Use your laptop or PC web browser to access the following URL: