Cisco Cisco Aironet 350 Wireless LAN Client Adapter

You need the following in order to install client utility and driver release 2.40 for Windows CE:

One of the following Windows CE devices equipped with a Type II or Type III PC card slot:

HPC 2000 device running Windows CE 3.0 with an ARM, StrongARM, MIPS, SH4, or X86 
processor

PPC 2000 device running Windows CE 3.0 with an ARM, StrongARM, MIPS, or SH3 processor

PPC 2002 or PPC 2003 device running Windows CE 3.0 with a StrongARM processor

Windows CE .NET device running Windows CE 4.0, 4.1, or 4.2 with a StrongARM or X86 
processor

This release should operate on Windows CE .NET devices with an XSCALE processor; 
however, official testing was not conducted with these devices.

ViewSonic devices running Windows CE .NET are not supported.

All drivers and supporting software (Card and Socket Services) for the PC card slot must be 
loaded and configured.

Cisco Aironet 350 Series Wireless LAN Client Adapter (PC card or LM card)

This release should operate with Cisco Aironet 340 series cards; however, official testing 
was not conducted with these cards.

Client adapter firmware version 5.02.19 or later (recommended)

Laptop or PC running a Windows operating system and ActiveSync

Serial or USB connection from the laptop or PC to the Windows CE device

PPC 2002 device, if your wireless network uses EAP-TLS or PEAP authentication

PPC 2003 and Windows CE .NET 4.2 devices should be able to use EAP-TLS or Microsoft 
PEAP authentication; however, official testing of these EAP authentication types was not 
conducted on these devices.

Certificate Authority (CA) and user certificates for EAP-TLS authentication or CA certificate for 
PEAP authentication

If your wireless network uses PEAP authentication with a One-Time Password (OTP) user database:

The hardware token from an OTP vendor

Your hardware token password