Cisco Cisco Aironet 350 Wireless LAN Client Adapter
3
Release Notes for Cisco Aironet Client Utilities 2.40 and Driver 2.40 for Windows CE
OL-5203-01
Important Notes
•
Access points to which your client adapter may attempt to authenticate must use the following
firmware versions or later: 11.23T (340 and 350 series access points), 12.2(4)JA (1100 series access
points), or 11.54T (1200 series access points).
firmware versions or later: 11.23T (340 and 350 series access points), 12.2(4)JA (1100 series access
points), or 11.54T (1200 series access points).
•
All necessary infrastructure devices (such as access points, servers, gateways, user databases, etc.)
must be properly configured for the authentication type you plan to enable on the client.
must be properly configured for the authentication type you plan to enable on the client.
Important Notes
Recommended Firmware Version
Client adapter firmware version 5.02.19 or later is recommended for use with client utility and driver
release 2.40 for Windows CE. If your client adapter is using a previous firmware version, follow the
instructions in the Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for
Windows CE to upgrade the firmware after installing client utility and driver release 2.40.
release 2.40 for Windows CE. If your client adapter is using a previous firmware version, follow the
instructions in the Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for
Windows CE to upgrade the firmware after installing client utility and driver release 2.40.
Using Client Adapters with Both Windows and Windows CE Devices
After you install Cisco Aironet client adapter Install Wizard 1.0 or later on a Windows computer, the
firmware of any client adapter that is inserted into that computer may be automatically upgraded to the
version included in the Install Wizard file. If you insert a client adapter that has been upgraded to
firmware version 5.02.19 or later into a Windows CE device, the adapter functions only if the device is
running client utility and driver release 2.30 or later for Windows CE.
firmware of any client adapter that is inserted into that computer may be automatically upgraded to the
version included in the Install Wizard file. If you insert a client adapter that has been upgraded to
firmware version 5.02.19 or later into a Windows CE device, the adapter functions only if the device is
running client utility and driver release 2.30 or later for Windows CE.
Cisco Aironet Software Requires Completion of Encryption Authorization Form
In order to access Cisco Aironet software from the Software Center on Cisco.com, you must now fill out
a form to receive authorization to download encrypted software. Registered Cisco.com users are required
to fill out the form only once while public users must do so once each session, each time software is
downloaded. A form is automatically created for public users. The form for registered Cisco.com users
is located at the following URL:
a form to receive authorization to download encrypted software. Registered Cisco.com users are required
to fill out the form only once while public users must do so once each session, each time software is
downloaded. A form is automatically created for public users. The form for registered Cisco.com users
is located at the following URL:
Supporting Documentation
Version OL-1375-03 of the Cisco Aironet Wireless LAN Client Adapters Installation and Configuration
Guide for Windows CE pertains specifically to client utility and driver release 2.30 and 2.40. If you are
using, installing, or upgrading to an older release of client adapter software, refer to the previous version
of this manual (OL-1375-02) for information and instructions.
Guide for Windows CE pertains specifically to client utility and driver release 2.30 and 2.40. If you are
using, installing, or upgrading to an older release of client adapter software, refer to the previous version
of this manual (OL-1375-02) for information and instructions.