Cisco Cisco Aironet 350 Wireless LAN Client Adapter
4
Release Notes for Cisco Aironet Client Adapter Firmware
OL-1533-01
Upgrading to a New Firmware Release
Step 5
Save the file to your computer’s hard drive or to a floppy disk and unzip it.
Note
If your computer is a Pocket PC (ppc) running Windows CE 3.0, you must copy the
firmware image to the My Documents folder or a folder under My Documents.
firmware image to the My Documents folder or a folder under My Documents.
Step 6
Make sure the client adapter is installed in your computer and is operational.
Step 7
Follow the instructions in one of the subsections below for your specific operating system.
Windows 95, 98, NT, 2000, or Me
Step 1
In the Aironet Client Utility (ACU), select Load New Firmware from the Commands pull-down menu.
Step 2
Find the location of the new firmware in the Open Window.
Step 3
Click the new firmware image (PC340-350vxxx.img) so it appears in the File name box at the bottom
of the window.
of the window.
Step 4
Click OK to load the firmware image into your client adapter’s Flash memory.
Windows CE
Step 1
Select Start > Programs > Cisco > Load New Firmware.
Step 2
Click the Select Firmware button.
Step 3
Find the location of the new firmware in the Open window.
Step 4
Click the new firmware image (PC340-350vxxx.img) so it appears in the Name box at the bottom of
the window.
the window.
Step 5
Click OK to load the firmware image into your client adapter’s Flash memory.
Linux
Step 1
Select Load New Firmware from the Commands pull-down menu.
Step 2
In the File Selection window, find the location of the new firmware in the Files box.
Step 3
Under Files, click the new firmware image (PC340-350vxxx.img) so it appears in the Selection box at
the bottom of the window.
the bottom of the window.
Step 4
Click OK to load the firmware image into your client adapter’s Flash memory.