Cisco Cisco Aironet 350 Wireless LAN Client Adapter
28
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 4.2
OL-15721-02
Caveats
•
CSCsj84780—ADU dimmed after installation
The ADU interface is dimmed even though the CB21AG client adapter is not configured to use
Windows Wireless Zero Configuration (WZC).
Windows Wireless Zero Configuration (WZC).
Workaround: Uninstall and reinstall the ADU software.
•
CSCsk01565—After LEAP domain logon, ADU usually asks for the authentication again
The client uses LEAP security with the automatic prompt option and WPA data encryption. When
the device is booted up, the user logs onto the domain. LEAP shows the progress of the
authentication and gets an IP address to log in. After login, LEAP asks for authentication data again.
the device is booted up, the user logs onto the domain. LEAP shows the progress of the
authentication and gets an IP address to log in. After login, LEAP asks for authentication data again.
Workaround: None.
•
CSCsk60117—Clients experiencing disconnects when roaming
Clients experience roaming delays of between 1 and 7 seconds with various configurations.
Workaround: None.
•
CSCsk83295—EAP-FAST auto PAC provisioning still displays dialog box
When the user logs in, the following message appears:
Card Name: Cisco Aironet 802.11a/b/g Wireless Adapter
The current EAP-FAST profile does not have a PAC or the configured PAC does not match
the authentication server. Do you want to use another PAC found on your local system
that matches the authentication server without reconfiguring the current EAP-FAST
profile?
YES or NO
Workaround: None.
•
CSCsk90617—ADU shows incorrect signal quality while increasing attenuation
Even when the client adapter signal becomes increasingly attenuated, the ADU and the CASSU
display the signal quality at 100% (the link speed is down to 2 Mbps). When the ADU is completely
disconnected from the access point, the ADU and the CASSU show the current signal strength at
0%, but the ADU shows the signal quality at 100%.
display the signal quality at 100% (the link speed is down to 2 Mbps). When the ADU is completely
disconnected from the access point, the ADU and the CASSU show the current signal strength at
0%, but the ADU shows the signal quality at 100%.
Workaround: None
•
CSCsl02673—CB21AG is slow to log in when PC is not a member of a domain
The login for a PC that is part of a workgroup but not a member of a domain is slow. The supplicant
is trying to find a domain controller, which causes the slow login.
is trying to find a domain controller, which causes the slow login.
Workaround: Replace the Cisco GINA (cscogina.dll) with the Microsoft GINA (msgina.dll). If you
want to keep the Cisco GINA, do the following:
want to keep the Cisco GINA, do the following:
–
Click the Profile Management tab in the ADU. Click the profile that is experiencing the slow
login.
login.
–
Click the Modify button.
–
Click the Security tab.
–
Check the Limit Time for Finding Domain Controller To: check box.
–
Enter 0 in the field for 0 seconds.
–
Click the OK button.