Cisco Cisco Aironet 350 Wireless LAN Client Adapter

CSCsm37565—DNS resolution test failure

The DNS resolution portion of diagnostic channel testing is initiated, and a resolvable host name is 
provided. However, the controller shows that the DNS query was dropped.

Workaround: None.

CSCsm37569—RSNA log request incorrect

A client adapter that uses EAP-FAST with AES encryption and CCKM receives an RSNA log with 
incorrect information after the adapter roams from one access point to another after the first access 
point is shut down. The RSNA log does not include CCKM information.

Workaround: None.

CSCsm37575—Client event log does not contain failed authentication

EAP-FAST authentication fails because the user enters an invalid passwor. After the access point 
sends an event log request frame to the client, the client does not send an event log that includes 
information about the failed authentication.

Workaround: None.

CSCsm42303—ADU does not prompt to re-enter user credentials

After EAP-FAST re-authentication after a session timeout, EAP-FAST authentication should fail, 
and an error message window should be displayed. The ADU should also prompt the user to re-enter 
user credentials. However, the prompt dialog box does not appear, and the connection continues.

Workaround: Log on to the Windows workstation with the new password.

CSCsm53534—Driver install fails if installed using install disk in Windows 2000 environment

The driver is installed by downloading and running a setup.exe file. The user verifies that a driver is 
not installed already. The driver is then installed through the Windows Device Manager. After 
running the setup.exe file, Windows displays a message that indicates that the installation is 
complete. The user clicks the Finish button in the user interface. The Windows Device Manager now 
shows that the driver is installed. When the user opens the Windows Network and Dial-up 
Connections window, the user selects the icon for the NIC and attempts to open the Properties 
window. The user then sees the “An unexpected error has occurred” message. The user restarts the 
machine. The Windows Device Manager shows the incomplete installation of the driver software for 
the NIC. Also, there is no entry for the NIC in the Windows Network and Dial-up Connections 
window.

Workaround: None.

CSCsm89230—WPA/WPA2 authentication fails

Clients experience WPA/WPA2 authentication failures when trying to associate to access points that 
are running the following Cisco IOS software releases with the following encryption methods:

Cisco IOS release 12.4(3g)JA1 with WPA2/AES or WPA2-PSK/AES

Cisco IOS release 12.4(10b)JA with WPA/TKIP or WPA-PSK/TKIP

This condition does not occur with a Cisco IOS software release 12.3(8)JEB or 12.3(8)JEA3.

Workaround: None.