Cisco Cisco Catalyst Blade Switch 3020 for HP

For /directory/image-name.tar, specify the directory (optional) and the image to download. Directory 
and image names are case sensitive.

This example shows how to download an image from a TFTP server at 198.30.20.19 and to overwrite 
the image on the switch:

Switch# archive download-sw /overwrite 

You can also download the image file from the TFTP server to the switch and keep the current image by 
replacing the /overwrite option with the /leave-old-sw option.

For additional recovery procedures, see the “Troubleshooting” chapter in the software configuration 
guide for this release.

You can assign IP information to your switch by using these methods:

The Express Setup program or the HP Onboard Administrator program described in the getting 
started guide.

The CLI-based setup program, as described in the hardware installation guide.

The DHCP-based autoconfiguration, as described in the software configuration guide.

Manually assigning an IP address, as described in the software configuration guide.

You should review this section before you begin working with the switch. These are known limitations 
that will not be fixed, and there is not always a workaround. Some features might not work as 
documented, and some features could be affected by recent changes to the switch hardware or software.

This section contains these limitations:

These limitations apply to switch: