Cisco Analog Modem Firmware Folheto
2 Release Notes for Analog Modem Firmware Version 1.0.1
Overview
Overview
Modem firmware is downloaded to the modems at startup. A version of firmware is always bundled
with the Cisco IOS image. A separate file can be stored in Flash memory to override this firmware
with one that contains newer features. If the router finds more than one version of modem firmware
at startup, it automatically loads the latest version.
with the Cisco IOS image. A separate file can be stored in Flash memory to override this firmware
with one that contains newer features. If the router finds more than one version of modem firmware
at startup, it automatically loads the latest version.
The firmware version must be compatible with the Cisco IOS software release level, as shown in
Table 1.
Table 1.
Features of Firmware Version 1.0.1
Firmware version 1.0.1 provides support for the following protocols:
•
ITU-T V.34 Annex 12 at 33600 and 31200 bps
•
ITU-T V.34 at 28,800, 26,400, 24,000, 21,600, 19,200, 16,800, 14,400, 12,000, 9,600, 7,200,
4,800, and 2,400 bps
4,800, and 2,400 bps
•
ITU-T V.32bis at 14,400, 12,000, 9,600, 7,200, and 4,800 bps
•
V.32 terbo up to 19,200 bps
•
ITU-T V.32 at 9,600 and 4,800 bps
•
ITU-T V.23 in two modes: split speed and half-duplex 1,200/75 (backchannel) bps
•
ITU-T V.22bis at 2,400 and 1,200 bps
•
ITU-T V.22 at 1,200 bps
•
ITU-T V.21 at 300 bps
•
Bell 212A at 1,200 bps
•
Bell 103A at 300 bps (asynchronous)
•
ITU-T V.42 (including MNP 2 to 4 and LAPM) error correction
•
ITU-T V.42bis and MNP 5 data compression
Table 2 shows supported countries and the minimum firmware version and minimum Cisco IOS
release needed.
release needed.
Table 1
Firmware Compatibility
Firmware Version
Cisco IOS Release
1.0.0
11.3(4)T and higher
1.0.1
11.3(5)T and higher
Table 2
Minimum Firmware Version and Cisco IOS Release by Country
Country
Firmware Version
Cisco IOS Release
Argentina
1.0.0
11.3(4)T
Australia
1.0.1
11.3(5)T
Austria
1.0.1
11.3(5)T
Belgium
1.0.1
11.3(5)T
Canada
1.0.0
11.3(4)T