Cisco Headend System Release 2.7 Guia Do Desenho
Managing Bandwidth and Service Groups
4002915 Rev B
17
Checking SDV Service Groups
The sgmParse.pl Utility
The sgmParse.pl utility can be used to read the service group map file. Service group
map files contain all of the frequencies, transport stream identifiers (TSIDs), and
modulation types that are assigned to a service group on gigabit quadrature
amplitude modulation (GQAM) and multiple QAM (MQAM) modulators.
map files contain all of the frequencies, transport stream identifiers (TSIDs), and
modulation types that are assigned to a service group on gigabit quadrature
amplitude modulation (GQAM) and multiple QAM (MQAM) modulators.
Complete the following steps to run the sgmParse.pl utility.
1 If necessary, open an xterm window on the DNCS.
2 Type cd /dvs/dvsFiles/SGM and then press Enter.
1 If necessary, open an xterm window on the DNCS.
2 Type cd /dvs/dvsFiles/SGM and then press Enter.
Important: Make sure you type a space before typing /dvs.
3 Type ls and then press Enter to list the service group map files.
Example: The following sample output shows the list of SGM files:
core sdb sdv servicegroupmap.dat
core sdb sdv servicegroupmap.dat
4 Type sgmParse.pl <service group map file name> and then press Enter.
Note: In the following example, TSIDs 8001 through 8004 are for video-on-demand
(VOD); TSIDs 3001 through 3016 are for SDV.
(VOD); TSIDs 3001 through 3016 are for SDV.
Example: