Cisco Headend System Release 2.7 Guia Do Utilizador
Managing Bandwidth and Service Groups
4019781 Rev B
11
4 Type mcParse.pl <service group file number> and press Enter.
Example: The following sample output shows the mini-carousel TSID and
frequencies for Service Group 1
frequencies for Service Group 1
Expand the Number of Available Service Groups
Introduction
For each SDV-enabled service group, a mini-carousel discovery file is created. Each
BFS carousel is limited to 475 individual files; and therefore, in earlier system
releases, the number of SDV-enabled service groups available on the DNCS was
limited to 475.
BFS carousel is limited to 475 individual files; and therefore, in earlier system
releases, the number of SDV-enabled service groups available on the DNCS was
limited to 475.
Important: The number of 475 SDV-enabled service groups available is based on a
block size of 4,000 bytes. Decreasing the block size on your system will decrease the
number of available service groups that an inband source can support. Cisco
recommends a block size of 4,000 bytes for these sources. This section assumes a
block size of 4,000 bytes.
block size of 4,000 bytes. Decreasing the block size on your system will decrease the
number of available service groups that an inband source can support. Cisco
recommends a block size of 4,000 bytes for these sources. This section assumes a
block size of 4,000 bytes.
Starting with this system release, the DNCS, by default, creates four additional BFS
sources to deliver the mini-carousel discovery files. This enhancement provides for a
default total of five carousels, or up to 2,375 SDV-enabled service groups.
sources to deliver the mini-carousel discovery files. This enhancement provides for a
default total of five carousels, or up to 2,375 SDV-enabled service groups.