Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Guia Da Instalação
Chapter 3 Configuration
28
4022871 Rev C
Note: The title bar indicates which start up mode was used, in this case Add
Device mode.
Device mode.
3 Use the Configuration Wizard toolbar buttons to perform most operations.
Save To
Database
Download
Alarm
Config to
Resource
Download
Config to
Resource
Refresh
Add
Resource
Copy
Resource
Paste
Resource
Delete
Resource
Define
Alarm
Limits
Limits
Define
Channel
Plan
Help
Topics
Important: If you are unfamiliar with the Configuration Manager please refer to
Chapter 2 - Working with the Configuration Wizard in the CheetahNet
Administration Guide (Tollgrade part number 6510-30-0357) that was provided with
the CheetahNet software. You can also access the document from the Help menu
within CheetahNet.
Chapter 2 - Working with the Configuration Wizard in the CheetahNet
Administration Guide (Tollgrade part number 6510-30-0357) that was provided with
the CheetahNet software. You can also access the document from the Help menu
within CheetahNet.
Adding the GS7000 Device Using the Configuration Wizard
Perform the following steps to add the GS7000 device.
1 Start the Configuration Wizard.
2 Under Filter Settings in the Category field, click the down arrow and select
1 Start the Configuration Wizard.
2 Under Filter Settings in the Category field, click the down arrow and select
FiberNode from the drop-down list.
3 Under Filter Settings in the Type field, click the down arrow and select GS7000.
Note: If the GS7000 device type is not listed then contact the Tollgrade Technical
Assistance department at 888-486-3510 and request the CheetahNet device driver
for the GS7000 Seg2Way device type ID# 8704.
Assistance department at 888-486-3510 and request the CheetahNet device driver
for the GS7000 Seg2Way device type ID# 8704.
4 Under Filter Settings in the Interface Device field, click the down arrow and
select the associated HEC that will be used to communicate with the GS7000
Seg2Way SM/LCM.
Seg2Way SM/LCM.
5 Under Filter Settings in the Port field, click the down arrow and select the
associated RF modem port that will be used to communicate with the GS7000
Seg2Way SM/LCM.
Seg2Way SM/LCM.
6 Under Filter Settings, click the Filter Resource List button.
7 On the Configuration Wizard toolbar, click the Add Resource button.
8 In the Resource List fields, enter the GS7000 Seg2Way SM/LCM device's
7 On the Configuration Wizard toolbar, click the Add Resource button.
8 In the Resource List fields, enter the GS7000 Seg2Way SM/LCM device's
Resource Name, Address, RPS Device, and RPS RF Input.