Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide

 

28 

4022871 Rev C 

Note:  The title bar indicates which start up mode was used, in this case Add 
Device mode. 

3  Use the Configuration Wizard toolbar buttons to perform most operations. 

 

Save To 

Database

Download 

Alarm 

Config to 

Resource

Download 

Config to 

Resource

Refresh

Add 

Resource

Copy 

Resource

Paste 

Resource

Delete 

Resource

Define 

Alarm 
Limits

Define 

Channel 

Plan

Help 

Topics

 

 

Important:  If you are unfamiliar with the Configuration Manager please refer to 
Chapter 2 - Working with the Configuration Wizard in the CheetahNet 
Administration Guide (Tollgrade part number 6510-30-0357) that was provided with 
the CheetahNet software.  You can also access the document from the Help menu 
within CheetahNet. 

 

Perform the following steps to add the GS7000 device. 
1  Start the Configuration Wizard. 
2  Under Filter Settings in the Category field, click the down arrow and select 

FiberNode from the drop-down list. 

3  Under Filter Settings in the Type field, click the down arrow and select GS7000. 

Note:  If the GS7000 device type is not listed then contact the Tollgrade Technical 
Assistance department at 888-486-3510 and request the CheetahNet device driver 
for the GS7000 Seg2Way device type ID# 8704. 

4  Under Filter Settings in the Interface Device field, click the down arrow and 

select the associated HEC that will be used to communicate with the GS7000 
Seg2Way SM/LCM. 

5  Under Filter Settings in the Port field, click the down arrow and select the 

associated RF modem port that will be used to communicate with the GS7000 
Seg2Way SM/LCM. 

6  Under Filter Settings, click the Filter Resource List button. 
7  On the Configuration Wizard toolbar, click the Add Resource button. 
8  In the Resource List fields, enter the GS7000 Seg2Way SM/LCM device's 

Resource Name, Address, RPS Device, and RPS RF Input.