Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Guia Da Instalação
OL-29941-01
7
Upgrading the RF Split in the GS7000 Node
2 Disconnect any cables currently connected to the RF Amp module.
3 Remove the 7 screws securing the RF Amp module in the node housing, and
3 Remove the 7 screws securing the RF Amp module in the node housing, and
then remove the module from the housing.
Note: For additional details as needed, see RF Amplifier Assembly
Replacement Procedure in the Model GS7000 GainMaker Scaleable 4-Port Node
Installation and Operation Guide, part number OL-29643-01.
Replacement Procedure in the Model GS7000 GainMaker Scaleable 4-Port Node
Installation and Operation Guide, part number OL-29643-01.
4 Turn over the RF Amp module.
5
5
Remove the 8 screws securing the reverse amplifier cover using a Torx T-10
screwdriver.