Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Guia Da Instalação
8
OL-29941-01
Upgrading the RF Split in the GS7000 Node
6 Using the T-10 screwdriver, remove the 16 screws securing the reverse amplifier
board.
7 Remove the reverse amplifier board using the 4 white handles provided for this
purpose.
Note: If the board is difficult to remove, try pushing on the top of the board
(where the RCM installs).
(where the RCM installs).
8 Install the new reverse amplifier board. Use all of the screws removed
previously, and tighten from 5 to 8 in-lb (0.56 to 0.90 Nm).
9 Replace the reverse amplifier cover. Use all of the screws removed previously,
and tighten from 5 to 8 in-lb (0.56 to 0.90 Nm).
10 Turn the RF module back over.
11 Reinstall the RCM removed previously.
11 Reinstall the RCM removed previously.