Cisco Headend System Release 2.7 Guia Da Instalação
Run the Doctor Report
740020 Rev H
33
Run the Doctor Report
Running the Doctor Report
Use the following procedure to run the Doctor Report on the DNCS.
1 If necessary, open an xterm window on the DNCS.
2 Type cd /export/home/dncs/doctor and then press Enter. The
1 If necessary, open an xterm window on the DNCS.
2 Type cd /export/home/dncs/doctor and then press Enter. The
/export/home/dncs/doctor directory becomes the working directory.
3 Type doctor and then press Enter. The system generates a list of parameters that
you can use to run the Doctor Report.
Note: Each parameter causes the Doctor Report to generate output with specific
configuration information.
Note: Each parameter causes the Doctor Report to generate output with specific
configuration information.