Cisco Headend Digital Broadband Delivery System Guia Da Instalação
Install MQAM Software onto the DNCS
4023372 Rev B
19
2 Choose one of the following options to navigate to the directory in which the file
is located:
If you are outside our firewall, type cd /pub/scicare/RELEASED/MQAM
If you are inside our firewall, type
cd /external_pub/scicare/RELEASED/MQAM
3 Type bin and press Enter. The system sets the ftp transfer mode to binary.
4 Type hash and press Enter. The system configures itself to display hash marks
4 Type hash and press Enter. The system configures itself to display hash marks
that show file-transfer progress.
5 Type prompt and press Enter. The system indicates that interactive mode is off.
6 Type get MQAM_2.6.18.tar.gz and press Enter. The system begins copying the
6 Type get MQAM_2.6.18.tar.gz and press Enter. The system begins copying the
file (or files) from the FTP site to the current directory on your DNCS.
7 Type bye and press Enter to log out of the FTP server.
8 Go to
8 Go to
Decompressing and Extracting the File (on page 19).
Decompressing and Extracting the File
1 From the xterm window, type gzip -d MQAM_2.6.18.tar.gz and press Enter. The
1 From the xterm window, type gzip -d MQAM_2.6.18.tar.gz and press Enter. The
system decompresses the MQAM software file.
2 Type tar xvf MQAM_2.6.18.tar and press Enter. The system extracts the
individual files.
3 Go to
Installing MQAM Software (on page 19).
Installing MQAM Software
1 From the xterm window where you are logged in as root, type
1 From the xterm window where you are logged in as root, type
/usr/sbin/install_pkg and press Enter.
Results:
Results:
The system lists the packages that will be installed.
A confirmation message appears asking you to confirm that you want to
proceed with the installation.
2 Type y and press Enter to start the installation.
Note: The installation should take less than 30 seconds.
3 Did a message appear indicating that the installation was successful?
If yes, go to step 4.
If no, contact Cisco Services.
4 Use the UNIX rm -rfi command to remove the following file and directory:
MQAM2618.tar (file)
SAIMQAM (directory)
Example: Type rm –rf SAImqam MQAM2618.tar and press Enter.
Result: A confirmation question message appears asking you to confirm the
Result: A confirmation question message appears asking you to confirm the
removal.