Cisco Headend System Release 2.7 Guia Da Instalação
Attach Mirrors
78-4021167-01 Rev D
25
Attach Mirrors
In this procedure, you will enable the disk-mirroring function of the server.
Complete the following steps to log on to the RNCS server and then to attach the
server’s mirrors.
Attaching Mirrors
Note: It may take up to 20 minutes to complete this process.
1 Log on to the RNCS server as root user, if necessary.
2 Type cd /cdrom/cdrom0/s0/sai/scripts and press Enter. The
1 Log on to the RNCS server as root user, if necessary.
2 Type cd /cdrom/cdrom0/s0/sai/scripts and press Enter. The
/cdrom/cdrom0/s0/sai/scripts directory becomes the working directory.
3 Type ./LIONN_attach_mirrors and press Enter. A confirmation message
appears.
4 Type y (for yes) and press Enter. The system runs a script that enables the disk-
mirroring function of the RNCS server.
5 When the mirrors have been enabled, type exit and press Enter. The root user
logs out of the RNCS server.
Suggestion Regarding the RNCS Software DVD
Leave the RNCS software DVD in the DVD drive of the RNCS server. You need the
DVD in place in case you ever have to re-install the software.