Cisco Headend System Release 2.7 Guia Do Utilizador
Chapter 2 Provisioning SDV Services on the DNCS
36
4024447 Rev C
Complete the following steps to add a scan list of frequencies to your SAM URL.
1 Click the Application Interface Modules tab, and then click SAM Service. The
1 Click the Application Interface Modules tab, and then click SAM Service. The
SAM Service List window opens.
2 Double click the _SASD SAM or _TASD SAM service. The Set Up SAM Service
window for the SDV SAM service opens, similar to the following example.
3 Click in the Application URL line and place your cursor at the end of the URL
statement.
4 Append the line to include your scan list in the following format:
;scan=<freq>:<mod>,<freq>:<mod>,<freq>:<mod>,... where frequency is
defined in MHz and <mod> is the QAM modulation format.
Important: You may enter up to 25 frequency:modulation pairs.
Example: DummyURL;scan=777:256,783:256
defined in MHz and <mod> is the QAM modulation format.
Important: You may enter up to 25 frequency:modulation pairs.
Example: DummyURL;scan=777:256,783:256