Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 Guia Do Utilizador

in minutes.

Important: Defining a rate less than 10 requires a large number of unnecessary
calculations on the CableCARD. Defining a rate greater than 20 does not coincide
with best security practices. 

Maximum Host
Change Count
Allowed

The maximum number of times that a CableCARD module is allowed to autobind
with a different host. When a module's Host Change Count equals this limit, it will
no longer be allowed to autobind with a different host.

This feature can help prevent a subscriber's unauthorized use of CableCARD
modules. 

You can enter a value in the range from 0 to 99.



Entering 0 in this field disables autobinding. 



Entering 99 indicates that an unlimited number of autobindings can

occur. This is the default setting.

RF Output

The channel over which the system delivers digital services.

Select Channel 3.

 

Card Authorization
Phone Number

The telephone number that subscribers call to verify that their CableCARD module
was authorized.

You can enter up to 20 alphanumeric characters, including spaces.

 

Maximum Bindings
within Authorization
Time-Out Period

The number of CableCARD modules and set-tops that can be bound during each
staging period.

The recommended value for this setting is 1500. 

Note: This value cannot be changed from the Server Configuration window. To
change this value, execute the modCCardStagingLimit script. For assistance using
this script, refer to 

Change the CableCARD Module Staging Limit

 (part number