Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 Guia Do Utilizador

1.

On the DNCS Administrative Console, click the DNCS tab.

2.

Click the Home Element Provisioning tab.

3.

Click CableCARD. The CableCARD Summary window opens.

4.

Click Server Configuration. The Server Configuration window opens.

5.

.

Use the following fields when you manage a CableCARD server in the DNCS.

CableCARD Server Address

IP Address

The IP address of the server that is running the CableCARD Server.

Typically, this is the IP address on the DNCS that connects to the QPSKs. For
example, 10.253.0.1.

Notes: 



Autobinding on: IP address



Autobinding off: 0.0.0.0

Tip: When entering IP addresses, type a period to move from octet to
octet. Do 

not

 press the Tab key to move from octet to octet; pressing

the Tab key moves the cursor to the next field on the window.

Port Number

The port number on the DNCS that the CableCARD server will monitor for
incoming CableCARD module requests.



Autobinding on: 13830



Autobinding off: 0

CableCARD Module Parameters

Authorization
Time-Out Period
(Hours)

The length of time the Host-CableCARD pair copy-protection authorization data is
kept in the file on the BFS.

Enter 2 in this field.



Negative values are not permitted in this field.



If you define a value greater than 2, be aware of the following

issues: 



The podData file can contain no more than 1500 authorization

entries. During staging, a pod/host pair is added to the podData file for
the amount of time defined in this field. When the Authorization
Time-out Period is reached, the pod/host pair is removed from the file.



If you attempt to exceed 1500 entries during the timeout

period you have defined, then pod/host pairs will be unable to bind.

DeAuthorization
Time-Out Period
(Days)

The number of days that the copy-protection deauthorization message for the
CableCARD module/host pair is kept in the file on the BFS.

Enter 30 in this field.