ONKYO HT-BD6315 B 40986 Manual Do Utilizador

En

■

`

Off: 

TV Control disabled.

`

On:

TV Control enabled.

Set to “On” when you want to control the AV receiver 
from an 

p-compatible TV that is connected to 

HDMI.

• Do not assign the component connected with the HDMI input to 

the TV/CD selector when you set “TV Control” setting to “On”. 
Otherwise, appropriate CEC (Consumer Electronics Control) 
operation is not guaranteed.

• Set  to 

“

”

 when the TV is not compatible or when it is unclear 

whether the TV is compatible or not.

• The 

“TV Control”

 setting can be set only when the above 

“

”

 and 

“Power Control”

 settings are both set 

to “On”.

• Refer to the connected component’s instruction manual for 

details.

You can change various audio settings by pressing 
AUDIO.

• When the “Audio TV OUT” setting is set to “On” (

32), 

AUDIO is disabled.

You can adjust the bass and treble for Speakers A and B 
front speakers, except when the Direct listening mode is 
selected.

■

`

–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut low-frequency sounds output 
by the front speakers.

■

`

–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut high-frequency sounds output 
by the front speakers.

• To bypass the bass and treble tone circuits, select the Direct lis-

tening mode.

• This procedure can also be performed on the AV receiver by 

using its TONE, –, and + buttons (

36).

You can adjust the volume of each speaker while listening 
to an input source.
These temporary adjustments are cancelled when the AV 
receiver is set to Standby. To save the setting you made 
here, go to “Level Cal (Level Calibration)” (

31) before 

setting the AV receiver to Standby.

■

`

–15 dB to 0 dB to +12 dB in 1 dB steps

■

`

–12 dB to 0 dB to +12 dB in 1 dB steps

• You cannot use this function while the AV receiver is muted.
• Speakers that are set to “No” or “None” in the “Sp Config 

30) cannot be adjusted.

EX.BASS is a technology that have developed by experi-
ments and listening tests to reproduce a natural deeper 
bass. When you turn the mode on, you can get dynamic 
and deeper presence on your movies and music.

■

`

Off: 

EX.BASS off.

`

On: 

EX.BASS on.

• The EX.BASS is disabled when the Direct listening mode is 

selected.

With the Late Night function, you can reduce the dynamic 
range of Dolby Digital material so that you can still hear 
quiet parts even when listening at low volume levels—
ideal for watching movies late at night when you don’t 
want to disturb anyone.

■

For Dolby Digital and Dolby Digital Plus sources, the 
options are:

`

:

Late Night function off.

`

Low:

Small reduction in dynamic range.

`

High:

Large reduction in dynamic range.

After changing the settings of the “HDMI Control”, 
“Audio Return Ch”, “Power Control”, or “TV Con-
trol”, turn off the power to all connected pieces of 
equipment and then turn them on again. Refer to the 
User’s Manuals for all connected pieces of equipment.

1

2

q/w to select an item, and e/r to change the 

setting.
Repeat this step for the other settings.