ONKYO HT-BD6315 B 40986 Manual Do Utilizador

En

For Dolby TrueHD sources, the options are:

`

Auto:

The Late Night function is set to “On” or “Off” 
automatically.

`

Off:

Late Night function off.

`

On:

Late Night function on.

• The effect of the Late Night function depends on the material 

that you are playing and the intention of the original sound 
designer, and with some material there will be little or no effect 
when you select the different options.

• The Late Night function can be used only when the input source 

is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.

• The Late Night function is set to “Off” when the AV receiver is 

set to Standby. For Dolby TrueHD sources, it will be set to 
“Auto”.

The Music Optimizer function enhances the sound quality 
of compressed music files. Use it with music files that use 
“lossy” compression, such as MP3.

■

`

:

Music Optimizer off.

`

On:

Music Optimizer on.

• The Music Optimizer function only works with PCM digital 

audio input signals with a sampling rate below 48 kHz and ana-
log audio input signals. The Music Optimizer is disabled when 
the Direct listening mode is selected.

• The setting is stored individually for each input selector.
• The  “M.Opt” indicator will light (

With the CinemaFILTER, you can soften overly bright 
movie soundtracks, which are typically mixed for repro-
duction in a movie theater.
CinemaFILTER can be used with the following listening 
modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD, 
Dolby Pro Logic II Movie, Multichannel, DTS, DTS 
Neo:6 Cinema, DTS 96/24, DTS-HD High Resolution, 
DTS-HD Master and DTS Express.

■

`

Off:

CinemaFILTER off.

`

On:

CinemaFILTER on.

• The CinemaFILTER may not work when used with certain input 

sources.

You can set priorities of audio output when there are both 
digital and analog inputs.

■

`

ARC:

The audio signal from your TV tuner can be sent to 
the HDMI OUT of the AV receiver.

*1

With this selection the TV’s audio can be automati-
cally selected as a priority among other assignments.

`

HDMI:

This can be selected when HDMI IN has been 
assigned as an input source. If both HDMI (HDMI 
IN) and digital audio inputs (COAXIAL IN or OPTI-
CAL IN) have been assigned, HDMI input is auto-
matically selected as a priority.

`

COAX:

This can be selected when COAXIAL IN has been 
assigned as an input source. If both coaxial and opti-
cal inputs have been assigned, coaxial input is auto-
matically selected as a priority.

`

OPT:

This can be selected when OPTICAL IN has been 
assigned as an input source.

`

Analog:

The AV receiver always outputs analog signals.

• The setting is stored individually for each input selector.
• This setting can be made only for the input source that is 

assigned as HDMI IN, COAXIAL IN, or OPTICAL IN. If both 
HDMI (HDMI IN) and digital audio inputs (COAXIAL IN or 
OPTICAL IN) are assigned, HDMI input will be selected as a 
priority by setting to “ARC” (

33). To select the digital audio 

input, see “Digital Audio (Digital Audio Input)” (

29).

*1

You can select “ARC” if you select the TV/CD input selector. 
But you cannot select it if you’ve selected “Off” in the “Audio 
Return Ch” setting (

33).

When using progressive scanning on your Blu-ray Disc/
DVD player, you may find that the picture and sound are 
out of sync. With this setting, you can correct this by 
delaying the audio signals.

■

`

 to 100 ms in 10 ms steps

• A/V Sync is disabled when the Direct listening mode is used 

with an analog input source.

• The setting is stored individually for each input selector.