Cisco Cisco Prime Collaboration Assurance 11.5 White Paper
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 31 of 48
mediatrace responder
mediatrace initiator source-ip source_interface_ip
!
If you want the performance monitor feature within
, you need to perform additional configuration on the
interfaces where you want deeper visibility. Following is a generic service policy for performance monitoring. Refer
egress interface as desired (GigabitEthernet 0/0 and GigabitEthernet 0/1 are just used as examples).
!
interface GigabitEthernet 0/1
!
service-policy type performance-monitor inline input
flow monitor inline
record default-rtp
!
!
interface GigabitEthernet 0/0
!
service-policy type performance-monitor inline output
flow monitor inline
record default-rtp
!
is another instrumentation feature within Cisco IOS Software. Cisco IOS Software IP SLAs help enable you
to assure new business-critical IP applications, as well as IP services that use data, voice, and video. The latest
Cisco Prime Collaboration addition to IP SLA is called IP SLA Video Operation (IP SLA VO). With IP SLA VO, you
can now generate synthetic video traffic without the video endpoints and see if there are any discrepancies in the
network ahead of time. For Cisco Prime Collaboration Assurance to set up the synthetic traffic from within the
application, navigate to Monitoring > Proactive Monitoring. Choose the qualified devices and other settings from
the pull-down menus and click Start.
To check for the latest device support for IP SLA VO, please visit
Feature, and then search for IP SLA Video Operation, and you should see the latest device support for this
feature.
In order for Cisco Prime Collaboration Assurance to use IP SLA VO functions, you need to configure only the
following line on the devices that support IP SLA VO:
!
ip sla responder
!