Cisco Headend System Release 2.7 Guia Da Instalação
Check SAM Timers
4036043 Rev B
19
Check SAM Timers
Follow these instructions to check the Update Timer and Schedule Timer fields on
the SAM Configuration window.
Important: The Cisco-recommended value for Update Timer is 600. The
recommended value for Schedule Timer is 1200. The values currently set on the
DNCS may differ. Do not make any change without first verifying with the system
operator.
1 From the DNCS Administrative Console, select the Application Interface
the SAM Configuration window.
Important: The Cisco-recommended value for Update Timer is 600. The
recommended value for Schedule Timer is 1200. The values currently set on the
DNCS may differ. Do not make any change without first verifying with the system
operator.
1 From the DNCS Administrative Console, select the Application Interface
Modules tab and then click SAM Config. The SAM Configuration window
opens.
opens.
2 Record the current Update Timer value here:
____________.
Note: If you change the value, record the new value here:
____________.
3 Record the current Schedule Timer value here:
____________.
Note: If you change the value, record the new value here:
____________.
4 Save any changes that you made.