Cisco Cisco FirePOWER Appliance 7020
51-8
FireSIGHT System User Guide
Chapter 51 Configuring Appliance Settings
Configuring Network Settings
The Information page appears.
Step 2
Click
Database
.
The Database Settings page appears.
Step 3
Select the
Allow External Database Access
check box.
The
Access List
field appears. See step
for more information.
Step 4
Type the fully qualified domain name (FQDN), IPv4 address, or IPv6 address of the Defense Center in
the
the
Server Hostname
field, depending on your third-party application requirements.
If you type an FQDN, you must make sure that the client can resolve the FQDN of the Defense Center.
If you type an IP address, you must make sure that the client can connect to the Defense Center using
the IP address.
If you type an IP address, you must make sure that the client can connect to the Defense Center using
the IP address.
Step 5
Next to
Client JDBC Driver
, click
Download
and follow your browser’s prompts to download the
client.zip
package.
See the FireSIGHT System Database Access Guide for information on using the tools in the package you
downloaded to configure database access.
downloaded to configure database access.
Step 6
To add database access for one or more IP addresses, click
Add Hosts
.
An
IP Address
field appears in the
Access List
field.
Step 7
In the
IP Address
field, you have the following options, depending on the IP addresses you want to add:
•
an exact IP address (for example, 192.168.1.101)
•
an IP address block using CIDR notation (for example, 192.168.1.1/24)
For information on using CIDR in the FireSIGHT System, see
.
•
any
, to designate any IP address
Step 8
Click
Add
.
The IP address is added to the database access list.
Step 9
Optionally, to remove an entry in the database access list, click the delete icon (
).
Step 10
Click
Save
.
Your database access settings are saved.
Tip
Click
Refresh
to revert to the last saved database settings.
Configuring Network Settings
License:
Any
When you first set up an appliance, you configure its network settings so that it can communicate on
your internal, protected management network. To change these settings and to configure additional
network settings such as proxies, use the Network page (
your internal, protected management network. To change these settings and to configure additional
network settings such as proxies, use the Network page (
System > Local > Configuration
, then click
Network
).