Intel D915GAVL Manual Do Utilizador

Página de 106
Intel Desktop Board D915GAV/D915GAG Technical Product Specification 
32 
 
1.9.3
  Diskette Drive Controller 
The I/O controller supports one diskette drive.  Use the BIOS Setup program to configure the 
diskette drive interface. 
 
For information about  
Refer to 
The location of the diskette drive connector on the D915GAV board 
Figure 19, page 66 
The location of the diskette drive connector on the D915GAG board 
Figure 20, page 68 
1.9.4
  Keyboard and Mouse Interface 
PS/2 keyboard and mouse connectors are located on the back panel. 
 
NOTE 
The keyboard is supported in the bottom PS/2 connector and the mouse is supported in the top PS/2 
connector.  Power to the computer should be turned off before a keyboard or mouse is connected or 
disconnected. 
 
For information about  
Refer to 
The location of the keyboard and mouse connectors 
Figure 18, page 64 
1.10
  Audio Subsystem 
The boards support the Intel High Definition audio subsystem based on the Realtek ALC860 codec.  
The audio subsystem supports the following features: 
•  Advanced jack sense (front and rear panel) that enables the audio codec to recognize the device 
that is connected to an audio port.  All jacks are capable of retasking according to user’s 
definition, or can be automatically switched depending on the recognized device type.  
•  Stereo input and output for all jacks 
•  A signal-to-noise (S/N) ratio of 90 dB 
#
 
INTEGRATOR’S NOTE 
For the front panel jack sensing and automatic retasking feature to function, a front panel daughter 
card that is designed for Intel High Definition Audio must be used.  Otherwise, an AC ’97 style 
audio front panel connector will be assumed and the Line Out and Mic In functions will be 
permanent.