Intel D915GAVL Manual Do Utilizador
Product Description
33
1.10.1
Audio Subsystem Software
Audio software and drivers are available from Intel’s World Wide Web site.
For information about
Refer to
Obtaining audio software and drivers
Section 1.4, page 19
1.10.2
Audio Connectors
The boards contain audio connector on both the back panel and the component side of the board.
The component-side audio connectors include the following:
• Front panel audio (a 2 x 5-pin connector that provides mic in and line out signals for front panel
The component-side audio connectors include the following:
• Front panel audio (a 2 x 5-pin connector that provides mic in and line out signals for front panel
audio connectors)
• ATAPI CD-ROM (an optional 1 x 4-pin ATAPI-style connector for connecting an internal
ATAPI CD-ROM drive to the audio mixer)
• S/PDIF (an optional 1 x 3 connector that provides S/PDIF output signals)
The functions of the back panel audio connectors are dependent on which subsystem is present.
For information about
Refer to
The location of the front panel audio connector, the optional ATAPI CD-ROM
connector, and the optional S/PDIF connector on the D915GAV board
connector, and the optional S/PDIF connector on the D915GAV board
Figure 19, page 66
The location of the front panel audio connector, the optional ATAPI CD-ROM
connector, and the optional S/PDIF connector on the D915GAG board
connector, and the optional S/PDIF connector on the D915GAG board
Figure 20, page 68
The signal names of the front panel audio connector
Table 24, page 70
The signal names of the optional ATAPI CD-ROM connector
Table 23, page 70
The signal names of the optional S/PDIF connector
Table 22, page 70