Samsung RFG29PEPN Manual Do Utilizador
operating
_13
02
OPERA
TING
USING THE CONTROL PANEL
( 1 ) Energy
Saver
Touching this button turns Energy Saver
mode on and off. When you turn Energy
Saver on, the Energy Saver icon lights.
Turn Energy Saver off and the icon
goes off. The Energy Saver function
automatically turns on. when power is
supplied to the refrigerator.
If condensation or water drops appear
on the doors, turn the Energy Saver
mode off.
mode on and off. When you turn Energy
Saver on, the Energy Saver icon lights.
Turn Energy Saver off and the icon
goes off. The Energy Saver function
automatically turns on. when power is
supplied to the refrigerator.
If condensation or water drops appear
on the doors, turn the Energy Saver
mode off.
( 2 ) Freezer
(Hold 3 sec
for Power
Freeze)
Touch this button to set the freezer to
your desired temperature.
You can set the temperature between
-8°F and 8°F (between -22°C and
-14°C). Touch and hold this button for 3
seconds to decrease the time needed
to freeze products in the Freezer. It can
be helpful if you need to quickly freeze
easily spoiled items or if the temperature
in the freezer has warmed dramatically
(For example, if the door was left open).
your desired temperature.
You can set the temperature between
-8°F and 8°F (between -22°C and
-14°C). Touch and hold this button for 3
seconds to decrease the time needed
to freeze products in the Freezer. It can
be helpful if you need to quickly freeze
easily spoiled items or if the temperature
in the freezer has warmed dramatically
(For example, if the door was left open).
( 3 ) Alarm
/ hold 3sec
for Filter
Reset
This button serves two purposes:
1) To turn the door open alarm on and
off
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left
open for more than three minutes. The
beeping stops when you close the door.
The door alarm function is pre-set to
On in the factory. You can turn it off by
touching and then releasing this button.
You can turn it back on in the same
fashion. The icon lights up when the
function is on.
2) To reset the water filter life indicator.
After you replace the water filter, touch
and hold this button for 3 seconds to
reset the water filter life indicator.
1) To turn the door open alarm on and
off
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left
open for more than three minutes. The
beeping stops when you close the door.
The door alarm function is pre-set to
On in the factory. You can turn it off by
touching and then releasing this button.
You can turn it back on in the same
fashion. The icon lights up when the
function is on.
2) To reset the water filter life indicator.
After you replace the water filter, touch
and hold this button for 3 seconds to
reset the water filter life indicator.
( 4 )
Lighting/
Hold 3 sec
for C↔F
Touching this button turns on the
Dispenser LED lamp (under the display)
in continuous mode so that it stays on
continuously. The button also lights
up. If you want the Dispenser lamp to
come on only when some one uses the
dispenser, touch this button to turn the
continuous mode off. Touch and hold
this button for 3 seconds to switch the
temperature units between °C and °F.
Dispenser LED lamp (under the display)
in continuous mode so that it stays on
continuously. The button also lights
up. If you want the Dispenser lamp to
come on only when some one uses the
dispenser, touch this button to turn the
continuous mode off. Touch and hold
this button for 3 seconds to switch the
temperature units between °C and °F.
( 5 ) Fridge
(Hold 3sec
for Power
Cool)
Touch this button to set the fridge to
your desired temperature. You can set
the temperature between 34°F and 46°F
(between 7°C and 1°C). Touch and hold
this button for 3 seconds to decrease
the time needed to cool products in
the Refrigerator. It can be helpful if you
need to quickly cool easily spoiled items
or if the temperature in the fridge has
warmed dramatically (For example, if the
door was left open).
your desired temperature. You can set
the temperature between 34°F and 46°F
(between 7°C and 1°C). Touch and hold
this button for 3 seconds to decrease
the time needed to cool products in
the Refrigerator. It can be helpful if you
need to quickly cool easily spoiled items
or if the temperature in the fridge has
warmed dramatically (For example, if the
door was left open).
( 6 ) Ice Off
(Hold 3 sec
for child
lock)
If you don’t want to make more ice,
touch this button. Also, pressing this
button for 3 seconds turns on Child
Lock which locks the display panel
and dispenser buttons so the buttons
can not be used. The Child Lock icon
lights up to indicate you’ve activated the
Child Lock function. Press 3 seconds
to unlock.
touch this button. Also, pressing this
button for 3 seconds turns on Child
Lock which locks the display panel
and dispenser buttons so the buttons
can not be used. The Child Lock icon
lights up to indicate you’ve activated the
Child Lock function. Press 3 seconds
to unlock.
( 7 ) Ice
Type
Touch this button to select your desired
ice type. Cubed and crushed ice modes
alternate when you press the button.
This mode can not be used with the
Water mode simultaneously.
ice type. Cubed and crushed ice modes
alternate when you press the button.
This mode can not be used with the
Water mode simultaneously.
(Cubed) (Crushed)
( 8 ) Water
Touch this button to dispense water.
This mode can not be used with the
Ice Type mode simultaneously. Water
mode will be off if you touch the Ice Type
button.
This mode can not be used with the
Ice Type mode simultaneously. Water
mode will be off if you touch the Ice Type
button.
Water
Operating your Refrigerator
8 9
10
7
1
2
3
5
6
4
DA99-03957C-06.indb 13
2015. 5. 7. �� 3:51