Samsung RFG29PEPN Manual Do Utilizador

 

operating

( 9 ) Ice Off If you don’t want to make more ice, 

touch the Ice Off button. 
The icon will light up and the Ice-Maker 
stops making ice.

We recommend you stop ice 
making if the following occur:
-  There is enough ice in the ice 

bucket.

- You want to save water and 
energy.
-  Water is not being supplied to 

the refrigerator.

If the ice maker function is 
ON, and the water Line is not 
connected, there will be a water 
valve noise from the back of the 
unit, press the Ice Off (Hold 3sec 
for child lock) button for less 
than 3 seconds until the Ice Off 
Indicator (

) illuminates.

If you do not press any button(letters not ICON), 
the display turns off in a few seconds.
If you press any button(letters not ICON), the 
display lights up again.  
The function key will operate after you remove 
your finger from the letters except E.Saver, Ice 
and Water key.

This icon will light up when you need to 

change the filter. After you use about 

300 gallons of water, the filter indicator 

lights up. (about 6 months). 

The icon will blink red for several 

seconds when you open or close the 

door. 

After you install the new water filter, reset 

the filter indicator by touching the Alarm/

hold 3 sec for Filter Reset button. 

•  If water is not dispensing or 

dispensing slowly, you need to 
replace the water filter because 
the water filter is clogged.

•  Some areas have large amounts 

of lime in their water, which 

causes the water filter to clog 

more quickly.

CHANGING THE WATER FILTER

To reduce risk of water damage to your 
property DO NOT use generic brands of 
water filters in your SAMSUNG Refrigerator.

USE ONLY SAMSUNG BRAND WATER FILTER. 
SAMSUNG will not be legally responsible for any 
damage, including, but not limited to property 
damage caused by water leakage from use of a 
generic water filter. SAMSUNG Refrigerators are 
designed to work ONLY WITH SAMSUNG Water 
Filter. If you want to purchase any accessories, 
please contact with Samsung service center.
The Filter light turns red to let you 
know when it is time to change your 
water filter cartridge.
To give you time to get a new filter, 
the red light comes on just before the 
capacity of the current filter runs out. 
Changing the filter on time provides you with the 
freshest, cleanest water from your refrigerator.
1.    Shut off the water supply. Then, turn the water 

filter ( 1 ) about 1/4 turn, counter-clockwise.

2.   Pull the water filter ( 1 ) from the case filter ( 2 ).

•  To change the water filter more easily, 

shut off the water supply valve.

•  Sometimes, it is hard to disassemble the water 

filter because impurities in the water cause it to 
stick. If you are having difficulties, grip the water 
filter firmly and pull it hard.

•  When you pull the 

water filter, a little 
water can leak from 
the opening. This is 
normal. To minimize 
the water leaks, keep 
the filter cartridge horizontal when you pull it.

•  To prevent overflow, empty the water filter tray       

( 3 ) and dry around the filter case ( 2 ).

3.  Insert the new filter into the filter case ( 4 ).
4.  Push the filter, and then turn it clockwise until it 

locks.

•  If you have trouble inserting the water 

filter because of high water pressure, 
shut off the water supply valve.

•  The locked symbol should be lined up with the 

indicator line.

(Red)

2

1

3

2

DA99-03957C-06.indb   14

2015. 5. 7.   �� 3:51