Samsung AR12FSFKBWTX Manual Do Utilizador
28
Troubleshooting
Refer to the following chart if the air conditioner operates abnormally. This may save
time and unnecessary expenses.
PROBLEM
SOLUTION
The air conditioner
does not work at all.
• Check power status and then operate the air conditioner
again.
• Plug in or switch on the circuit breaker and then operate the air
conditioner again.
• Check if you have set the Off Timer. Operate the air conditioner again
by pressing the Power button.
The temperature
adjustment is not
working.
• Check if you have selected Dry/Fan/Turbo/d'light Cool mode. In
these modes, desired temperature is set to auto and you cannot
adjust the temperature.
Cool/Warm air does
not come out the
air conditioner or
performance is
reduced.
• Check if the set temperature is higher(during Cool mode)/
lower(during Heat mode) than the current temperature. Press the
Temp hr. + or – button on the remote controller to change the set
temperature.
• Check if the Full HD filter is blocked by dirt. If there is a lot of dust on
the Full HD filter, cooling(heating) performance may decrease. Clean
them frequently.
• Check if the outdoor unit is…obstacle away. When clearing the
obstacle (e.g. snow or ice), use suitable tools so as to be careful not to
damage the product nor injure yourself during this process.
• If you want to operate the air conditioner in the sunlight, cover the
outdoor unit using curtains or etc.
• Check if the air conditioner is operating in De-ice mode.
When the ice formed in winter or the outdoor temperature is too
low, the air conditioner operates in De-ice mode automatically. In
De-ice mode, indoor fan stops and cool air does not come out.
• If the doors or windows are open, it may cause bad cooling (heating)
performance.
Close the doors and windows.
• Check if the air conditioner has just been turned on after stopping
cooling or heating operation. In this case, just a fan will run to protect
the outdoor unit compressor.
• Check if the pipe length is too long. When the pipe length exceeds
maximum allowable pipe length, cooling (heating) performance
may decrease.
Air flow adjustment
is not working.
• Check if you have selected
mode. In these modes, and
you cannot adjust the air flow direction.
(If the good’ sleep mode is operating in Heat mode, you can adjust
the air flow direction)
Junfrau EE_AR09FSFK@_IB&IM_DB68-06190A-00_EN.indd 28
2016/5/5 13:34:23