Samsung DVD-HR753 Manual Do Utilizador

Página de 213
English - 21
C
onnecting & Setting Up
Case 3 : Component Video output 
jacks
Connect Component video cables(not supplied) 
between the COMPONENT OUT(Y, P
B
, P
R
) jacks 
on HDD & DVD RECORDER and COMPONENT 
IN(Y, P
B
, P
R
) jacks on your TV. 
You will enjoy high quality and accurate colour 
reproduction images.
Connect audio cables (white and red) between the 
AUDIO OUT jacks on the HDD & DVD RECORDER 
and AUDIO IN jacks on TV (or AV amplifi er).
(See pages 21~22).
After connecting, refer to the pages 37~38.
Green
Red
Blue
Green
Blue
Red
Make sure that the colour coded connections 
match. The Y, P
B
, P
R
 component output jacks 
of your HDD & DVD RECORDER must be 
connected to the exact corresponding 
component input jacks on your TV. 
Progressive setting is only available when the 
Video Out is set to Component. 
(See pages 37~38)
1.
2.
3.
M
Other type of connecting the Audio 
output cable 
There are several ways to output audio signal not 
using scart cables. Select the audio connection 
that best suits you below. 
Case 1 : Connecting to your TV 
Case 2 :  Connecting to a stereo amplifi er with AV 
output jacks 
Case 3 :  Connecting to an AV amplifi er with a digital 
output jack 
Manufactured under licence from Dolby 
Laboratories. “Dolby” and the double-D symbol are 
trademarks of Dolby Laboratories. 
“DTS” and “DTS Digital Out” are trademarks of 
DTS, Inc.
Case 1 : Connecting to your TV 
If your TV has audio input jacks, use this connection. 
Yellow
White
Red
Red
White
Yellow