Samsung DVD-HR753 Manual Do Utilizador

English - 27

Auto channel scan will be started.

The number of stations automatically stored by the HDD & DVD 
RECORDER depends on the number of stations that it has found.

After auto channel scan is completed, auto clock setting will be 
started automatically in 10 seconds. If you want to start auto clock 
setting immediately, press OK button. If you do not want to do auto 
clock setting, select No using the 

◄►buttons, then press the OK 

button.

Wait until current date and time are displayed automatically. If you 
want to exit auto clock setting, press MENU button. 

Now, HDD & DVD RECORDER is ready for use. Function for 
“Plug & Auto Setup” is fi xed already. So if you want to change 
this fi xed one, you can change it by Presetting the Stations in 
OSD “Channel Set - Manual Setup” menu. (See pages 28~29) 
Auto setup function can be performed by pressing STOP ( ) 
on the unit continuously for 5 seconds or more during power off 
with no disc inserted. 

Check the date and time.

If it is : Correct, press OK button then the date and time will be 
saved. If you don’t press the OK button, the date and time will be 
saved automatically after 5 seconds. 
If it is : Incorrect, input correct Month, Day, Year, Hour or Minute 
using 

▲▼, ◄► buttons or number buttons. Press OK button then 

the date and time will be saved. When you need to change clock 
setting, you can set up it manually. 

With the unit in Stop mode, press the MENU button.
Press the 

▲▼ buttons to select Setup, then press the OK or ► 

button.

Press the 

▲▼  buttons to select Clock Set, then press the OK or ► 

button.
Press the 

▲▼◄► buttons to input Month, Day, Year, Hour or 

Minute. Press the number buttons to input clock data directly. 
The day of the week is displayed automatically.

Press the OK button, then the date and time will be saved. If you 
don’t press the OK button, it will not be saved.

You must have the RF cable connected to set the Auto Clock. 
(See page 18) 
The HDD & DVD RECORDER automatically sets the clock 
according to the time signal broadcast between the channels 
PR1 to PR5. If you do not need the Auto Clock Set function, 
select Off.

•

M





•

•

M





<

 

s

 

r

 

e

1

|
|
|
|
|
|
|

m

 

s

 

r

 

e

1

|
|
|
|
|
|
|

m

 

s

 

r

 

e