Alpine DVE-5207 Manual Do Utilizador

-EN

Initial System Start-Up

Be sure to press the RESET button when using the unit for the first
time, after changing the car battery, etc.

Turn off the unit power.

Press RESET with a ball-point pen or similar
pointed object.

Loading and Unloading Discs

Turn on the power before loading and unloading discs. (Refer to
“Turning the Power On and Off” on page 8.)

Loading discs

Insert the disc with the label side facing upwards.

Once the disc is partially inserted, it is drawn in automatically.
Playback starts.

• If the ignition key is on ACC or ON, a disc can be inserted even

when the power is OFF.

• For two-sided DVDs, play one side of the disc to the end, then

unload the disc, turn it over and reload it to play the other side.

• Never insert map discs for navigation purposes as they could

damage the equipment.

• If wrong disc, upside-down discs or dirty discs have been inserted,

“DISC ERROR” is displayed. Press c and eject the disc.

Unloading discs

Press c.

Be sure to remove the disc.

• If the disc is not removed within a few moments, it will be reloaded

automatically.

• If the ignition key is set to ACC or ON, a disc can be removed even

when the power is OFF. After removing the disc, the power turns
OFF again automatically.

• During ACC OFF or while the disc is being loaded (“LOADING”

is displayed), the disc will not be ejected even if you press c.

Setting the Wallpaper

A data file downloaded from the ALPINE Owner’s website is written
to a CD-R/CD-RW disc, and automatically uploaded when the disc is
inserted into the DVE-5207.
The wallpaper file can be saved and displayed only if the current disc
is not playing back pictures or CD/MP3 audio.

• If several files are stored in a disc, only the first file will be stored

on the unit.

Insert a CD-R/CD-RW disc containing data.

After sensing the disc, the DATA DOWNLOAD screen is
displayed.

Press and hold ENT. for at least 2 seconds to
change the wallpaper.

• Up to 2 files can be stored on this unit. If a third file is

downloaded, the first file is overwritten and new one memorized.

• To change the wallpaper, press and hold ENT. for at least 2

seconds while displaying it.

• Even if the battery power cable is removed, the downloaded data is

not cleared.

RESET