Alpine DVE-5207 Manual Do Utilizador
10
-EN
DVD/Video CD
Playing DVD/Video CD
Caution
• Not all functions will operate for every DVD. See the individual
DVD’s instructions for details on the features supported.
• Fingerprints on a disc may adversely affect playback. If a
problem occurs, remove the disc and check for fingerprints on
the playback side. Clean the disc if necessary.
the playback side. Clean the disc if necessary.
• When using the remote control, be careful to press one button
at time. Pressing multiple buttons at the same time may cause
erroneous operation.
erroneous operation.
• If you switch the power or ignition key OFF during playback,
playback will continue where you left off when you resume
playback.
playback.
• If you try to perform an invalid operation (based on the type of
disc being played), the following mark is displayed on the
monitor screen:
monitor screen:
• DVE-5207 automatically changes the video output signal
(NTSC or PAL), according to the disc. To set NTSC or PAL on
the connected monitor, refer to the Owner's Manual of the
monitor.
the connected monitor, refer to the Owner's Manual of the
monitor.
Insert a disc with the label side facing up.
To load discs, see “Loading and Unloading Discs” on page 9.
Playback starts.
Playback starts.
• The reverse side of a double-sided DVD will not be played
automatically. Remove the disc, turn it over, and reinsert it.
• It may take some time before playback starts after loading a disc.
If a menu screen appears
On DVDs and video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
may appear automatically. If this happens, perform the operation
described below to start playback.
• For many discs, the menu screen can also be displayed by pressing
MENU.
DVD menu
Press 8, 9, ; or : to select the desired item, then
press ENT.
press ENT.
• For some discs it is possible to select items directly from the menu
screen using the number keys (“0” to “9”).
Video CD menu
Use the number keys (“0” to “9”) to select the desired
number, then press ENT.
number, then press ENT.
• The menu screen does not appear when the PBC function is turned
off. In this case, set VCD PLAY MODE to turn on the PBC
function. For details, Refer to “Setting the Video CD Play Mode”
(page 20).
function. For details, Refer to “Setting the Video CD Play Mode”
(page 20).
Stopping Playback (PRE-STOP)
Press L during playback to stop playback. That position is stored in
memory.
memory.
1
Press L during playback.
“PRE-STOP” is displayed.
2
Press -/J in the PRE-STOP mode.
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may
not be accurate.
Stopping Playback
Press L twice during playback.
“STOP” is displayed, and playback stops.
• Playback stops also when L is pressed for more than 2 seconds.
• Playback starts from the beginning when -/J is pressed while
• Playback starts from the beginning when -/J is pressed while
playback is stopped.
Fast-forwarding/Fast-reversing
1
During playback, press and hold g (fast-reverse)
or f (fast-forward) .
or f (fast-forward) .
When pressed for more than 1 second, the disc is
forwarded/reversed at double speed.
When held in 5 more seconds, the disc is forwarded/
reversed at 8 times the normal speed.
forwarded/reversed at double speed.
When held in 5 more seconds, the disc is forwarded/
reversed at 8 times the normal speed.
2
Release g or f to return to normal playback.
• No sound appears during fast-forward/fast-reverse.
• fast-forwarding/fast-reversing of only a track being played back
• fast-forwarding/fast-reversing of only a track being played back
can be made on the Video CD equipped with PBC (playback
control).
control).
• For DVDs and video CDs with playback control (PBC), the menu
screen may reappear during fast-forwarding/fast-reversing.
DISPLAY
RETURN
:/J
g
L
CLR
REPEAT
AUDIO
MENU
;
8
:
ENT.
9
9
f
number
keys
(0 to 9)
keys
(0 to 9)
ANGLE
SUBTITLE