Alesis studio24 Manual Do Utilizador

The SOLO switches in each channel, along with the Control Room switches and
Headphone section, make up the Control Room system of the Studio 24. This is the
engineer’s mix. It allows you to audition the different mixes that are going on at any
given time and to hear individual inputs when needed, all without disturbing the
other mixes that are going to the musicians, the PA system or recorder. It also
controls the stereo meter display.

Normally, the CONTROL ROOM OUT jacks are connected directly to the inputs of a
stereo amplifier such as the Alesis RA-100, which power a set of near-field monitors
such as the Alesis Monitor One or Point Seven reference monitors mounted within a
few feet of the console.

The Control Room can selectively monitor the Main outputs (L/R), MONITOR 1/2,
the Aux mixes, the Group mixes, or an external mixdown tape deck. The lowest
switch which is pressed will be the source; if no switches are down, the L/R mix will
be heard.

The Headphone jack outputs the same signal that the Control Room is hearing.