Alpine cda-9830r Manual Do Utilizador
7
-EN
Changing the Display Type (CDA-9831R only)
There are three selectable display types. You can also deactivate the
display.
display.
Press DISP/B.OUT to switch the display type.
Type1
→ Type2 → Type3 → OFF → Type1
Type1 : The indicator on the left changes in a fixed sequence.
Type2 : The indicator on the left changes according to the
Type2 : The indicator on the left changes according to the
setting (see "Setting the Multicolour Illumination" on
page 22).
page 22).
Type3 : The indicator on the left changes according to audio
level.
Detaching and Attaching the Front Panel
Detaching
1
Turn off the unit power.
2
Press
(Release) at the upper left side until the
front panel pops out.
3
Grasp the left side of the front panel and pull it out.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel.) This is not a
malfunction.
malfunction.
• To protect the front panel, place it in the supplied carrying case.
Attaching
1
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
unit. Align the groove on the front panel with the
projections on the main unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.
firmly into the main unit.
2
1
1
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel
to avoid pushing buttons by mistake.
Radio
Listening to Radio
1
Press SOURCE/POWER until a radio frequency
appears in the display.
appears in the display.
2
Press BAND/TEL. repeatedly until the desired
radio band is displayed.
radio band is displayed.
FM1 (F1)
→ FM2 (F2) → FM3 (F3) → MW → LW → FM1 (F1)
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode)
→ SEEK (Local mode) →
OFF (Manual mode)
→ DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press g or f to tune in the desired station.
Holding down g or f will change the frequency
continuously.
continuously.
• The ST indicator appears on the display when a stereo FM station
is tuned in.
SOURCE/
POWER
POWER
BAND/
TEL.
TEL.
g
f
TUNE/
A.ME
A.ME
Preset buttons
(1 through 6)
(1 through 6)
Rotary encoder
SEARCH/Q.S.
F