Alpine cda-9830r Manual Do Utilizador
8
-EN
Manual Storing of Station Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of
the preset buttons (1 through 6) that you want
to store the station on.
the preset buttons (1 through 6) that you want
to store the station on.
The selected station is stored.
The display shows the band, preset no. and station
frequency memorized.
The display shows the band, preset no. and station
frequency memorized.
• A total of 30 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2, FM3, MW and LW).
• If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
new station.
• If the “FUNC” indicator is illuminated, turn off the indicator by
pressing F, then you can perform the operation.
Automatic Memory of Station Presets
1
Press BAND/TEL. repeatedly until the desired
radio band is displayed.
radio band is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while
the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location no. 1.
the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location no. 1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
Press BAND/TEL. repeatedly until the desired
band is displayed.
band is displayed.
2
Press any one of the station preset buttons (1
through 6) that has your desired radio station in
memory.
through 6) that has your desired radio station in
memory.
The display shows the band, preset number and
frequency of the station selected.
frequency of the station selected.
• If the “FUNC” indicator is illuminated, turn off the indicator by
pressing F, then you can perform the operation.
Station Title Search Function
If the title of a radio station is entered, you can search for that radio
station by its title while listening to the currently received radio
station.
station by its title while listening to the currently received radio
station.
1
Press SEARCH/Q.S.
in Radio mode to switch to
Title Search mode.
The first title input blinks in the display.
2
Select the desired title by turning the Rotary
encoder within 10 seconds.
encoder within 10 seconds.
3
Press the Rotary encoder to receive the
frequency of the selected title.
frequency of the selected title.
• Search mode in Title Search mode is cancelled by pressing and
holding SEARCH/Q.S.
for at least 2 seconds.
• If a station has no title, “NO TITLE” is displayed for 2 seconds.
• Any radio station can be searched by the Station Title Search
• Any radio station can be searched by the Station Title Search
function. The station titles are displayed in the order they were
input.
input.
Frequency Search Function
You can search for a radio station by its frequency.
1
Press and hold SEARCH/Q.S.
for at least 2
seconds in Radio mode to activate Frequency
Search mode.
Search mode.
2
Turn the Rotary encoder within 10 seconds to
select the desired frequency.
select the desired frequency.
3
Press the Rotary encoder to receive the selected
frequency.
frequency.
• Search mode in Frequency Search mode is cancelled by pressing
and holding SEARCH/Q.S.
for at least 2 seconds.