Allen-Bradley devicenet modules in logix5000 control systems Manual Do Utilizador
Publication DNET-UM004A-EN-P - March 2004
10-2 Communicate with an RSView® Project
To access the DeviceNet network, either connect the computer with
the RSView application to any of the following networks:
the RSView application to any of the following networks:
• same DeviceNet network as the desired device
• EtherNet/IP or ControlNet network and bridge communication
• EtherNet/IP or ControlNet network and bridge communication
to the DeviceNet network
– Avoid bridging through a CompactLogix, FlexLogix, or
DriveLogix controller. They have limited resources for
bridging.
bridging.
– For those controllers, use the I/O tags in the controller, if
possible.
To use an RSView project to get or set a parameter of a DeviceNet
device:
device:
Before You Use This
Chapter
Chapter
Before you use this chapter, make sure that you can see all your
devices on the DeviceNet network.
devices on the DeviceNet network.
For this information:
See page:
1. Start RSLinx software.
2. Click the RSWho button.
3. Expand a driver that lets you access
the DeviceNet network.
4. Browse to the DeviceNet network.
5. Make sure you see all the devices
that are connected to the DeviceNet
network.
network.