Antares autotune4 Manual Do Utilizador
30
SHAPE MENU
Selects the shape of the vibrato. The choices are:
NO VIBRATO
Pretty self-explanatory
SINE WAVE
Changes smoothly from minimum to maximum and
back again. The most common choice for a conventional vibrato.
SQUARE
Jumps to maximum where it spends 50% of the cycle and
then jumps to minimum for the remaining 50% of the cycle.
SAWTOOTH
Gradually rises from minimum to maximum and then
drops instantaneously to minimum to start the cycle again.
RATE
Sets the rate of the vibrato over a range of 0.1 Hz to 10 Hz. The default
Rate setting is 5.5 Hz. Double-clicking the Rate knob will reset it to that
value.
Rate setting is 5.5 Hz. Double-clicking the Rate knob will reset it to that
value.
VARIATION
Sets the amount of random variation that will be applied to the Rate
and Amount parameters on a note to note basis. Useful for humanizing
the vibrato by adding random“errors.”
and Amount parameters on a note to note basis. Useful for humanizing
the vibrato by adding random“errors.”
The range is from 0 (no variation) to 100 (maximum variation). The
default Variation setting is 20. Double-clicking the Variation knob will
reset it to that value.
default Variation setting is 20. Double-clicking the Variation knob will
reset it to that value.
ONSET DELAY
Sets the amount of time (in msec) between the beginning of a note
and the beginning of the onset of vibrato. The range is from 0 to
1500ms (1.5 seconds). The default value is 500ms. Double-clicking the
knob will reset it to that value.
and the beginning of the onset of vibrato. The range is from 0 to
1500ms (1.5 seconds). The default value is 500ms. Double-clicking the
knob will reset it to that value.