autotech 10.425.1526gk Manual Do Utilizador
A
U
T
O
T
E
C
H
Installation Instructions
Phone 949.240.4000 Fax 949.240.0450
32240-E Paseo Adelanto, San Juan Capistrano, CA 92675
Part Number:
10.425.1526K
Description:
ClubSport® Lightweight Front Swaybar for VW A4 Chassis
Notes: The ClubSport® adjustable front swaybar directly replaces the factory unit using
factory mounting points. We include new polyurethane bushings for the inner pivot mounts
of the swaybar. The original outer links are to be re-used. The new 2-position mounting
brackets enable simple and quick roll stiffness adjustment - unique in the market.
of the swaybar. The original outer links are to be re-used. The new 2-position mounting
brackets enable simple and quick roll stiffness adjustment - unique in the market.
Because it is neccessary to support, detach, and then lower the front subframe to gain
access to the swaybar, this installation is best performed on a vehicle hoist/lift, but can also
be performed (with some difficulty) on jackstands.
be performed (with some difficulty) on jackstands.
Procedure:
1) Raise the vehicle. Make sure the the front subframe and its attachment points are not
obstructed by the hoist or jackstands.
2) Position a height adjustable support stand beneath the center of the subframe to the rear
of the engine, around where the steering rack attaches. Later, this will be used to gently
lower the subframe away from the chassis.
lower the subframe away from the chassis.