Avaya 2420 Manual Do Utilizador

1. Press   Admin or 

 Admin 1. See "Display Key Programming" on 

2. Pressing Expl? 

 to switch to longhand programming mode.  

3. Press Next 

 until the required function required is shown, then press 

Selct 

.  

4.  If the function requires some data to be entered, [ is shown at the 

bottom of the display. Enter the data using the normal telephone 
keypad.  

5.  The upper part of the display reverts to showing the functions currently 

assigned to each 

 and 

 key.  

6. Use the   and 

 keys to move between the pages of display keys.  

7.  Select the display key against which to program the new function by 

pressing that 

 or 

 key.  

•  Do not select the slot used for the Admin function. Replacing this 

function will lock the phone for further programming until reset 
through the telephone system.  

8.  If the display slot is not already used, the display shows BUTTON 

PROGRAMMED!. Press the 

 or 

 keys until EXIT is shown.  

•  Press 

 EXIT to end programming. 

•  Press Cont 

 to continue programming other functions.  

9.  If the display slot already has a programmed function, the display shows 

FEATURE ON BUTTON. Press the 

 or 

 keys until Repla, Keep 

and Delet are shown along the right-hand edge of the display.  
•  Press Repla 

 to replace that existing function with the one just 

programmed. The display then shows BUTTON PROGRAMMED! 
as above. 

•  Press Keep 

 to keep the existing function and forget the function 

just programmed.  

•  Press Delete 

 to delete the existing function and forget the 

function just programmed.