Avaya deskphone ntys20dc70e6 Manual Do Utilizador

Attach the foot stand in the appropriate slots, depending on the desired 

angle for your IP Deskphone. If you insert the foot stand into the upper 

slots, your IP Deskphone sits at a 25-degree angle. If you insert the foot 

stand into the lower slots, your IP Deskphone sits at a 55-degree angle.

If you install your IP Deskphone on a wall, do not attach the foot stand.

1. Align the bottom tabs on the foot stand with the position 1 slots or the 

position 2 slots on the back of your IP Deskphone.

In position 1 the IP Deskphone sits at a 25-degree angle.

In position 2 the IP Deskphone sits at a 55-degree angle.

 shows the slots on the back of the IP 

Deskphone.

2. Press the foot stand into the slots until it snaps into place.

Use the following procedure to connect the handset to the Avaya 1230 IP 

Deskphone.

1. Plug the end of the handset cord with the short straight section into 

the handset.

2. Plug the other end of the handset cord with the long straight section 

into the handset jack marked with the 

+

 symbol on the back of the IP 

Deskphone.

3. (Optional) Thread the cord through the channel in the foot stand (if 

installed) so that it exits on the side of the foot stand.

 shows the connections on the back of the Avaya 

1230 IP Deskphone.