Avaya deskphone ntys20dc70e6 Manual Do Utilizador

If you have a headset, you can connect the headset to the Avaya 1230 IP 

Deskphone. For information on how to use your headset with your IP 

Deskphone, refer to 

.

1. Plug the headset cord into the headset jack on the back of the Avaya 

1230 IP Deskphone marked with the 

)

 symbol.

 shows the connections on the back of the Avaya 

1230 IP Deskphone.

2. Thread the cord through the channel in the side of the foot stand.
3. Set up the headset according to the headset instructions.
After you have the IP Deskphone working, you must configure the 

headset using 

.

Your Avaya 1230 IP Deskphone supports AC power or Power over 

Ethernet (PoE) options, including IEEE 802.3 standard power.

If you are using PoE, where power is delivered over the CAT5 cable, the 

LAN must support PoE. If you use PoE, you do not need an AC adapter.

To use local AC power, use only the Avaya-approved Global Power 

Supply (NTYS17xxE6) and country-specific IEC cable. You can order the 

Avaya-approved AC adapter and country-specific IEC cable separately.  

1. Connect the DC barrel connector to the power jack on the back of the 

Avaya 1230 IP Deskphone. 

2. Thread the cable through the channel in the foot stand to secure the 

cable. 

Use only the approved Avaya Global 

Power Supply with your Avaya 1230 IP 

Deskphone.